Brio MK7
Retail $1,195
Current Brio. Handmade half-width aluminium case. 50 W per channel into 8 Ω, 72 W into 4 Ω. Built-in MM phono, onboard Rega DAC (coax + optical), front headphone socket, mini-system remote. Completely re-laid circuit vs the previous analogue-only Brio — second raw supply for isolation between the output stage and the line/phono/DAC stages, MUSES op-amps, thermal cut-out, short-circuit protection, auto standby.
Three line inputs plus phono. Speakers mute when headphones are plugged in. This is the current production amp — the previous-generation analogue-only Brio on the site is a separate demo / NIB closeout. Lifetime warranty against manufacture defects for the original owner, per Rega.
What's in the box
- Brio MK7
- Mini-system remote
- Mains cable
- Owner documentation as supplied by Rega
Specifications
| Type | Integrated amplifier · MM phono · DAC · headphone |
|---|---|
| Power output | 50 WPC into 8 Ω · 72 WPC into 4 Ω |
| Analogue inputs | 1× MM phono · 3× line RCA |
| Digital inputs | S/PDIF coax (isolated 0.5 V / 75 Ω) · optical Toslink |
| DAC sample rates | 32, 44.1, 48, 88.2, 96, 176.4, 192 kHz |
| Headphone | Front-panel socket · speakers muted when in use |
| THD + noise | Typically 0.005% at 1 kHz (A-weighted) |
| Power consumption | 200 W · standby 0.4 W (auto after 1 hour, can be switched off) |
| Protection | Thermal cut-out · fold-back short-circuit (out of the signal path) |
| Remote | Mini-system remote (standby / power) |
| Dimensions (W × H × D) | 216 × 79 × 365 mm (8.5 × 3.1 × 14.4 in) |
| Weight | 4.9 kg (10.8 lb) |
| Warranty | Rega lifetime against manufacture defects (original owner) |
Specs and photos from rega.co.uk/products/brio-mk7.